3RX9502-0BA00
AS-i Power 5A 120 V/230 V AC AS-Interface power supply unit, IP20 IN: 120 V / 230 V AC OUT: AS-i, 5 A (30 V DC), IP20 with integrated ground fault detection, with integrated overload detection with AS-i data decoupling

3RX95030BA00
Input:
AC 120V/230V-500V
4,4A/2,4A
50-60Hz
Output:
DC 30V/8A
DC 30V/5A
E06

CPU531-EN
16AM10N
16AN01R

MG955080-A
40x10mm

IFM EFECTOR AC1244 AS-i
IMPUT: AC 100V.. 240V 47HZ.. 63HZ..
2,4A.. 1,2A
externot fuse: 10A, chor B
OUTPUT: DC 29,6V... 31,6V max 4,00A/,max 120V

AC/DC DIN RAIL SUPPLY 24V 120W
Universal AC input voltage range
Power will not de-rate for the entire input voltage range
Power Boost of 150% for 5 seconds
Full corrosion resistant aluminium casing
Conforms to harmonic current IEC/EN 61000-3-2, Class A
Extreme low temperature cold start at -40°C
Conformal coating on PCBAs to protect against common dust and chemical pollutants
Hazardous Locations approval for ATEX and Class I, Div 2 (DRP024V120W3BA)
Certified according to IEC/EN/UL 62368-1

Mouser No:108-DRP024V480W3BN
Mfr. No:
DRP024V480W3BN
Mfr.:Delta Electronics

DIN Rail CliQ II Series DRP024V240W3BA
Delta DRP024V240W3BN 380V 24V10A Switch Rail Power Supply

DIN Rail CliQ Series DRP012V100W1AA
Universal AC input voltage range
Power will not de-rate for the entire input voltage range
Power Boost of 150% for 3 seconds
Full corrosion resistant aluminium casing
Conforms to harmonic current IEC/EN 61000-3-2, Class A
Multiple wire connections to terminal allowed
Conformal coating on PCBAs to protect against common dust and chemical pollutants
Hazardous Locations approval to ATEX and Class I, Div 2
Certified according to IEC/EN/UL 62368-1

DIN Rail CliQ Series DRP012V060W1AA
Universal AC input voltage range
Power will not de-rate for the entire input voltage range
Power Boost of 150% for 3 seconds
Full corrosion resistant aluminium casing
Conforms to harmonic current IEC/EN 61000-3-2, Class A
Multiple wire connections to terminal allowed
Conformal coating on PCBAs to protect against common dust and chemical pollutants
Hazardous Locations approval to ATEX and Class I, Div 2
Certified according to IEC/EN/UL 62368-1

MACX MCR-EX-SL-RPSSI-I(-SP)
Repeater power supply and input isolating amplifier,
Ex i
Description
Repeater power supply and input isolating amplifier,
Ex i
MACX MCR-EX-SL-RPSSI-I(-SP)
© PHOENIX CONTACT
Data sheet
The repeater power supply and input signal conditioner is
designed for the intrinsically safe (Ex i) and electrically
isolated operation of measuring transducers and mA current
sources installed in the hazardous area.
2-wire measuring transducers are supplied with energy via
a powered input with intrinsic safety.
4-wire measuring transducers and mA current sources can
be operated via a non-powered input.
The analog 0/4 ... 20 mA measured value from the
hazardous area is electrically isolated 1:1 when transmitted
to the non-hazardous area.
You can operate the output of the module actively or passively.
The analog measured value on the Ex or non-Ex side can be
overlayed with digital (HART) communication signals and
transmitted bidirectionally.
You can connect additional resistance in the output circuit in
order to increase the HART impedance in low-ohmic
systems using a terminal point.
Sockets are integrated into the COMBICON connectors for
connecting HART (HHT) communicators.
The devices are certified for safety-related applications up
to SIL 2 in accordance with IEC/EN 61508.
Features
– 1-channel
– 0/4 mA ... 20 mA input, intrinsically safe, [Ex ia],
powered and not powered
– Measuring transducer supply voltage > 16 V
– 0/4 ... 20 mA output, active up to 1000  load or passive
– Bidirectional HART signal transmission
– Error indication according to NAMUR NE 43
– SIL 2 according to IEC 61508/EN 61508
– Installation in Ex zone 2 permitted
– Safe 3-way electrical isolation
– Power supply possible via DIN rail connector
– Plug-in connection terminal blocks, with either screw or
push-in connection technology
– Housing width of 12.5 mm
– Low power dissipation
– High transmission accuracy